How To Fix Xbox Controller Won’t Move Left/Right


This guide is written to help you fix the Xbox controller that won’t move. Am writing this guide with the assumption that the controller is not broken, but simply needs a little bit of adjustment.

The guide also assumes that you have an Xbox One controller and it has been working properly up until now. If your controller still doesn’t work after following these steps, then it is probably broken and should be replaced.

We hope this guide helps!


Why Wouldn’t Xbox Controller Won’t Move Left/Right


This article discusses the issue of the Xbox controller not moving, and what to do when it doesn’t work. The article also includes troubleshooting tips on how to fix this issue.

If your Xbox controller doesn’t move, then it’s because the controller is unresponsive. To fix this issue, you can try these troubleshooting tips:

  1. Check your batteries. If you have fresh batteries, try replacing them with old ones and sliding the switch on the back of the controller to turn it on before trying again.
  2. If you have a wireless controller, then check the batteries in the receiver. If it’s still not working, then try plugging your controller directly into the Xbox One console with a mini-USB cable.
  3. Check and make sure that your controller is compatible with the console you are using it on by trying to connect it to another device or player on the console.
  4. If all else fails and your controller is still unresponsive, then try using a different type of Xbox One controller.


How to Fix Xbox Controller Won’t Move Left/Right


The Xbox controller is a great gaming tool, but it can sometimes have problems. The Xbox Controller Won’t Move (Left/Right/Etc) is one of the most common problems that players face.

In this section, we will show you how to fix the Xbox controller in just a few minutes.

  1. First, make sure the controller is plugged in and turned on.
  2. Next, make sure the battery is fully charged. If it’s not, charge it again until it is fully charged.
  3. Lastly, if none of the above steps work, try resetting your controller by holding down the power button for 10 seconds and then plugging it back in.

If none of these steps work either, you may have a hardware issue with your Xbox One controller that needs to be fixed by Microsoft or an authorized repair center.



How to Change Your Xbox Gamertag for Free

How to Fix Xbox One that Turns ON But Won’t Stay ON

How To Fix Xbox Audio Not Working

How to Save Photos and Videos From Facebook

How to Fix Fingerprint Not Working Anymore On Your Android Device


How to Properly Clean Your Xbox Controller


There are a few ways to properly clean your Xbox controller. You can use a wet cloth and soap or you can use the oven. The latter option is more effective in removing dirt and grime from your controller. If you don’t have an oven, you can use a hairdryer to blow warm air on the controller for about ten minutes.

The first step in cleaning your Xbox controller is to disconnect it from the console. Next, take a wet cloth and soap to it and scrub it all over, including the buttons, triggers, sticks, and analog sticks. Once you’ve finished scrubbing it with soap and water, rinse it off completely before letting it dry completely on its own. The next step is to place the controller in an open oven with no fan for about 20 minutes.


How To Reset Xbox One Controller


The Xbox One controller has a lot of buttons and features that are easy to get lost in. This section will help you reset the controller so you can use it again without any hassle.

Xbox One Controller Reset:

  • Press the “B” button on your controller.
  • When the light bar starts flashing, press and hold the “B” button until the controller vibrates twice and turns off.
  • Remove the batteries from your Xbox One Controller for about 30 seconds before replacing them.


How To Sync Xbox One Controller


To sync Xbox One controller, you have to go through a few steps. First, you need to plug the controller into the Xbox One console via a USB port.

Then, you need to switch on your Xbox One console by pressing the power button and ensure that your controller is connected via Bluetooth or wired connection. Lastly, you need to open up the settings of your Xbox One console and navigate through them until you find the “Devices” option which will allow you then select the “Controllers” option from there.


Does Factory Resetting Xbox One Delete Everything?


In the past, factory resetting an Xbox One would delete all of your saved games, achievements, and other content. However, recent updates have made this process much easier.

A factory reset is a term that refers to the process of restoring a device to its original state by deleting all data on it and then reinstalling the software. It is typically used for devices like computers and smartphones where there are many different apps installed on them.

The main reason why people factory reset their devices is that they want to sell them or give them away without any personal data attached to them. When you factory reset your device, you will lose any content that was saved on it before you did this action.


What Is The Bind And Eject Button On Xbox One?


The Xbox One features a unique and innovative eject button that allows users to easily remove the disc from the console.

The Xbox One features a unique and innovative eject button that allows users to easily remove the disc from the console. The button is located on top of the Xbox One, just below where it says “Xbox”. It can also be found in the guide menu, which is accessed by pressing your controller’s start button.

If you want to remove a game disc from your Xbox One, simply press down on top of the eject button and slide it out of its slot. If you want to reinsert a game back into your console or get rid of an old one, just press down on top of the eject button and push it back.


Can I Update My Xbox One With My Phone?


You can update your Xbox One console with your phone. The process is a little complicated and requires a few steps.

The process to update your Xbox One with your phone is a little complicated. You need to first download the Xbox Companion App on iOS or Android, then you need to connect the two devices via Bluetooth, and finally, you need to update through the app.

It’s not as easy as just connecting your phone wirelessly and updating it over WiFi, though that would be possible if you had an Xbox One S or X.


How To Pair An Xbox One Controller?


In this section, I will be explaining how to pair an Xbox One controller with your PC.

This article is also helpful for people who are new to gaming and want to know how to use their controllers.

Pairing an Xbox One controller is a simple process that can be done by following these steps:

  • Plug the controller into the USB port on your computer
  • Startup the game that you want to play on your computer
  • Press the Xbox button on your controller and select “Devices”
  • Select “Xbox Wireless Controller” from the list of devices
  • The game should now recognize it as an Xbox One controller.


Video Guide





The Xbox controller is an important part of a gaming experience. It’s the only thing that lets you play games with the same feel as the original console.

However, sometimes controllers stop working for no apparent reason. This often happens when your controller gets wet or dirty over time and then needs to be cleaned up before it can work again.

In this article, I have discussed a few ways to fix an Xbox Controller that Won’t Move either left or right problem.

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

Leave a Comment