How To Fix Sony Soundbar Not Working (Repair Guide)


Sony has always been a brand known for its quality audio products. The company has been producing some of the best soundbars and speakers on the market, and many people have bought them as a result.

However, sometimes the Sony Soundbar does not work as expected. This guide will help you fix the Sony soundbar not working by providing you with tips on troubleshooting your device.


How To Fix Sony Soundbar Not Working


Why is Sony Soundbar Not Working


Sony Soundbar not working? Here are some reasons why your soundbar may not be working.

  1. The power cord is not plugged in
  2. The power button is pressed
  3. The remote is not within the range of the soundbar
  4. The batteries are dead
  5. There’s no HDMI cable connected to the TV


How to Fix Sony Soundbar Not Working


Is the Sony soundbar not working? There are a few things you can try to fix it.

  1. Check if the device is plugged into a power outlet and turned on.
  2. Check if the device is turned on and powered by holding down the power button for 10 seconds before turning it off with the power button again.
  3. If you still have troubles, try using headphones instead of speakers or connecting the headphone jack to an auxiliary input on your TV or other audio devices to ensure there isn’t a problem with your TV or audio equipment.
  4. Try connecting your Sony soundbar to another compatible audio source such as an external speaker, computer, or streaming devices like Roku or Apple TV.
  5. If none of these solutions work, contact Sony for help.




Is the Sony soundbar not working? Here are some solutions to try.

  1. Unplug the power cord from the wall outlet and wait 10 minutes before plugging it back in.
  2. Plug the power cord into a different wall outlet, or make sure that it is plugged into a grounded outlet.
  3. Check if there are any other devices plugged into the same outlets as your soundbar, like a TV or computer monitor, and unplug them.
  4. If none of these work, you may need to replace your soundbar with a new one or purchase an external speaker that is compatible with your device.


Steps to Reset Sony Ht-ct390 Sound Bar


Steps to Reset Sony Ht-ct390 Sound Bar


This section will show you how to reset your Sony Ht-ct390 soundbar using the remote control and the power button.

  • Step 1: Unplug the power cord of the soundbar from the wall outlet.
  • Step 2: Remove all the screws in the back of the soundbar.
  • Step 3: Pull out all of the connected cables to your soundbar and disconnect them from their respective ports.
  • Step 4: Unplug all other devices connected to your soundbars, such as your TV or device.
  • Step 5: Wait for five minutes while you disconnect everything else from your soundbar and wait for it to cool down before plugging back in again.
  • Step 6: Reconnect everything back into their respective ports.
  • Step 7: Plug your soundbar back into the wall outlet and turn it on.
  • Step 8: Enjoy your newly tuned soundbar!


MORE READ: How To Fix Roku Soundbar Not Working (Repair Guide)


Steps to Reset Soundbar Samsung


Soundbars are a great experience for users with their booming sound. However, sometimes the soundbar might not be working as it should.

This article will teach you how to reset your Samsung soundbar so that you can enjoy the best audio experience possible. The following steps will help you reset your Samsung soundbar.

  1. Turn off the power of the soundbar by pressing and holding the power button for about 8 seconds.
  2. Disconnect all cables from the soundbar and remove them from their original location.
  3. Remove all screws that secure the back panel of the soundbar. Make sure to note where they are located on your device before removing them to put them back in their original place when you are done with your repair.
  4. Remove two screws securing the speaker grill, then remove the speaker grill from the inside of the unit.


This is one of those situations where you might need an external tool to help out with some technical tasks. Many people prefer using an app on their mobile phones or tablets instead of relying on a computer or laptop for these kinds of things because they are easier to carry.


Why is the Blue Light Flashing on My Sony Soundbar?


The blue light flashing on your soundbar signifies that the device is in trouble. Here are some of the most common problems that may cause the blue light to flash:

  • The device has been dropped and needs to be replaced.
  • The power cord has been unplugged from the wall outlet.
  • The soundbar is overheating and needs to cool down for a few minutes before it can be used again.
  • There is an issue with your wireless connection with the soundbar.


How Do I Pair My Sony Sound Bar?


There are many different ways to pair your Sony Sound Bar. You can use the input selection on your TV or connect it to a sound system with a 3.5mm audio cable.

There is also a wireless option where you connect your soundbar to the wireless transmitter that comes with the soundbar.

To pair your Sony Sound Bar, turn on your TV and make sure that it is connected to the power outlet. Then, turn on your Sony Sound Bar and make sure that it has power by pressing and holding the power button until you hear three beeps in succession.


MORE READ: How To Fix Vizio TV Menu Not Working (Repair Guide)


How Do I Reset My Sony Bluetooth Soundbar?


Some people might have a Sony Bluetooth soundbar that has stopped working. If this happens, you can try resetting the soundbar to see if it works again.

Step 1: Remove the power cord from the back of the soundbar.

Step 2: Press and hold the power button for 10 seconds.

Step 3: Release the power button and then press and hold it again for 10 seconds.

Step 4: Wait until all lights on your Sony Bluetooth soundbar go out, then plug the power cord back into the back of the device.


How Do I Sync My Sony Soundbar to My Tv?


Soundbars are a popular addition to the home theater. They can be connected to your television and provide audio for movies, TV shows, music, etc.

  1. Connect your soundbar to the back of your TV using an HDMI cable.
  2. Connect the soundbar to an AC power outlet.
  3. Press the power button on your soundbar and select “TV“.
  4. Select “HDMI” from the options on the left side of your screen.
  5. Select “TV speaker” from the options on the right side of your screen.
  6. Select “HDMI 2” from the options on the left side of your screen.
  7. Select “TV speaker” from the options on the right side of your screen.
  8. Adjust the soundbar to your preferred volume level.



How To Fix Sony TV Red or Green Light On/Blinking

How To Fix Sony TV HBO Not Working (Repair Guide)

How To Fix Sony TV Sound Skips/Cuts Out/Not Sync/Unclear/Goes Up and Down

How To Fix Sony TV HDMI Not Working (Repair Guide)

How To Fix Sony TV Apps Not Working

How To Fix LG TV Remote Won’t Control Volume (Repair Guide)


Video Guide








The guide to Fix Sony Soundbar Not Working is a concise yet detailed guide on fixing the Sony soundbar not working. This article provides step-by-step instructions on fixing the problem with your device.

It also provides solutions for common error codes that you might encounter. If you have questions, please ask using the comments section.

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

Leave a Comment