Samsung Dryer Won’t Stop/Turn Off (Repair Guide)


Samsung dryers are a popular choice for many homeowners because of their sleek design and durability. However, there may be times when the dryer will not turn off or stop.

This can happen for various reasons, but the following guide will help you identify the cause and fix it. This article covers all you need to know about how to fix Samsung Dryer won’t stop or turn off.

The first thing to do is verify that the dryer is getting power. If it is getting power, you will want to check if something is blocking the door sensor, which could prevent it from shutting off.


Samsung Dryer Won’t Stop/Turn Off


Why is Samsung Dryer Won’t Stop/Turn Off


Samsung dryers are not just machines that can take your clothes from wet to dry. They are also a tool that can help you save time and energy.

But what if it won’t stop turning on or off? Here are some reasons why your Samsung dryer might not turn off:

  1. The door is open, and the machine is still running.
  2. The door switch is malfunctioning.
  3. There is a problem with the vent hose, air intake, or exhaust hose.
  4. The timer control is broken, turning on and off by itself.
  5. The heating element might have an issue, so it never reaches the temperature needed to turn off automatically.


How to fix Samsung Dryer Won’t Stop/Turn Off.


Samsung Dryer Won’t Stop/Turn Off


This is a common problem and can be fixed with a few simple steps.

  • The first step is to unplug the dryer from the power source, remove the screws that hold the rear panel, and take it off.
  • Next, disconnect the wire harnesses and unscrew them from their terminals.
  • The next step is to identify which of these two wires are connected to the thermal fuse, then cut them both and strip off about 1/2 inch of insulation from each wire end.
  • Finally, reconnect all of your wires, put on your rear panel, reconnect your power cord and test it out!


Does a Samsung Dryer Have a Reset Button?


The answer to this question is no. Samsung dryers do not have a reset button. The only way to reset the dryer is by unplugging it and plugging it back in.

If you are experiencing problems with your Samsung dryer, try these steps before contacting customer service:

  • Check the power cord and make sure that it is plugged in securely.
  • Unplug the dryer and check for loose or broken wires inside the back of the machine.
  • Check if you have any foreign objects blocking airflow through your venting system.


Why Does My Samsung Dryer Keep Turning off After a Few Minutes?


A Samsung dryer is not supposed to turn off after a few minutes of operation. This is a sign that something is wrong with the appliance.

If you have noticed this problem, it is time to take some action and find out what the problem could be. When your Samsung dryer turns off after a few minutes of operation, the first thing that you should do is to check for any signs of lint or other debris on the exhaust venting.

The venting must be clear for the dryer to work properly. Also, check for any loose connections or worn parts inside the appliance and clean them up if they are found.


Why Does My Dryer Shut off After a Few Minutes?


Why Does My Dryer Shut off After a Few Minutes?


After a few minutes of drying, a dryer shuts off because the clothes are not getting enough heat to dry them. Several things: can cause this.

  • A clogged lint filter.
  • A clogged vent.
  • The door is not closed properly.
  • The vent is blocked by something, and the air cannot flow through it properly.
  • The power cord has been pulled out or is loose from the wall outlet.


How Do You Check a Samsung Dryer Temperature Sensor?


The Samsung dryer temperature sensor is a part of the dryer that detects the heat in the dryer drum. The sensor is usually located on top of the drum and is connected to a wire that runs to a control panel.

To check your Samsung dryer temperature sensor, you need to follow these steps:

  1. Please turn off the power and unplug your dryer from its power source.
  2. Remove the back panel by unscrewing screws on either side of it with an adjustable wrench or Philips screwdriver. The screws are usually located at the top, bottom, and sides of the panel.
  3. Remove wires from their clips by pressing them together with your fingers or using needle-nose pliers or wire cutters if they are difficult to remove.
  4. Cut the end of flat metal or rigid wire stripped from a piece of wire coat hanger with wire cutters or snips and use it to pull the back panel out from inside the camera body.


How Do I Know if My Dryer Moisture Sensor is Bad?


Dryers have been a major source of home fires and carbon monoxide poisoning. Dryers are also responsible for significant energy consumption, so they should be monitored and checked regularly.

To know if your dryer’s sensor is dead, you should check the following:

  • The sensor’s display will not show anything or show an error code.
  • The sensor will not turn on when you open the door to the dryer.
  • You will hear strange noises coming from your dryer when it’s running, and there is nothing in it.
  • You may also notice that your clothes are not as dry as before or take longer to dry.



How To Fix Reset Samsung Dryer (Repair Guide)

How To Fix Samsung Dryer Won’t Heat Up/Heats Up But Won’t Dry Clothes

How To Fix Samsung Fridge Not Dispensing Water (Repair Guide)

How To Fix Samsung Smart Switch not Transferring (Repair Guide)

How To Fix Samsung Washer Won’t Lock/Won’t Unlock

How To Fix Samsung Washer Not Starting/Stopping


Video Guide








This guide has provided a few solutions to fix the Samsung dryer that won’t stop or turn off. The first solution is to check the power cord. If it seems loose, tighten it with a screwdriver.

If the power cord is not loose, check the outlet for any blockage and ensure no other appliances are plugged in. If these solutions don’t work, then you might want to contact Samsung customer service for further assistance.

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

Leave a Comment