Kenmore Refrigerator Freezer not working is a common problem that can be fixed in a few simple steps. First, you should check to see if the power cord is plugged into an outlet and if the refrigerator or freezer is receiving power.
If the power isn’t coming on, make sure the cord is plugged into an active outlet, and if it still doesn’t work you’ll need to reset your circuit breaker.
To fix this, turn off all of your lights and then turn them back on one by one. If this doesn’t work, then you’ll need to call for electrical service from a professional.
Why is Kenmore Refrigerator Freezer Not working
Kenmore refrigerator freezer stops working is a common issue faced by homeowners. We have compiled a list of 5 reasons why the Kenmore refrigerator freezer may not be working and how you can fix it.
- The power cord has become disconnected from the fridge
- There is no power coming into your house
- The fridge or freezer has been on for too long
- The fuse has blown in your house
- Your refrigerator or freezer needs to be replaced
How to Fix Kenmore Refrigerator Freezer Not Working
This article will provide you with a complete guide on how to fix your Kenmore refrigerator freezer.
Kenmore Refrigerator Freezer stops Working:
- Unplug the appliance from the wall outlet and allow it to cool down for about an hour.
- Remove the back panel of the appliance and locate the cooling coil, which is located in the back of the refrigerator or freezer compartment.
- Take care of any ice buildup around this cooling coil by wiping it with a damp cloth or rag, then allow it to dry before replacing it in its location.
- Plugin your appliance again and try turning it on again by pressing its power button for at least ten seconds after you see “Welcome” displayed on your screen for at least five seconds. Then try turning it.
Kenmore Refrigerator Compressor Not Running
Kenmore refrigerators are known for their reliable performance. However, when your Kenmore refrigerator compressor is not running, it can be a sign that something is wrong with the unit.
The fan works inconsistently and it’s making a lot of noise. It could be a sign of an issue with the compressor belt or that something else has broken down. Whatever the problem is, you should be contacting an appliance repair company to fix it as soon as possible.
Kenmore refrigerators come with a built-in compressor to make sure your food stays cold. If the unit doesn’t run, you should contact an appliance repair professional.
How Do I Know If My Fridge Thermostat is Broken?
What the fridge should be set at is a temperature that prevents the food from spoiling. If it’s not, you’ll need to read the thermostat to tell whether you’ve been over under-stating your desired temperature.
If there is no light when you press the “on” button, or if the temperature of your fridge is too high or too low, then it’s likely that there’s a problem with your thermostat. You can also check for a broken connection by turning it off and on again.
How Do You Put a Kenmore Refrigerator In Diagnostic Mode?
Diagnostic mode is a feature that lets you diagnose a problem with your refrigerator. The following are the steps in diagnostic mode.
- Step 1: Press and hold the power button for five seconds
- Step 2: Press and hold the reset button for five seconds
- Step 3: Press and hold both buttons for 10 seconds
- Step 4: Wait until all lights turn off before releasing the buttons.
How Do You Reset a Kenmore Refrigerator Freezer?
To reset a Kenmore refrigerator-freezer, you will need to take the following steps:
- Unplug the appliance from the wall outlet.
- Remove the access panel on top of the unit.
- Remove the screws from both sides of the access panel.
- Pull out each side of the access panel and remove it from the appliance.
- Disconnect each wire that is attached to either side of the control board.
Why is My Refrigerator Working But Not The Freezer?
Refrigerators and freezers work differently. A refrigerator uses a compressor to move heat from one place to another. This is why the cold air that comes out of the fridge is warmer than the air in the freezer.
Air typically is warm and dense, which means it’s not a good conductor of electricity. This limits the amount of ice that can form in an air-conditioner, but when cold is applied to the system, the pressure difference between the inside and outside creates ice crystals.
The coldest part of a freezer is at its top where it’s usually around -30 degrees Celsius or -22 Fahrenheit. In contrast, the coldest part of a refrigerator is usually at the bottom where it’s around.
This temperature difference prevents food from spoiling as quickly as it would if placed in both places. The coldest part of a freezer is at its top where it’s usually around -30 degrees Celsius or -22 Fahrenheit.
The difference in temperatures found at the bottom of a refrigerator keeps food fresh and prevents it from spoiling. The coldest part of a refrigerator is usually at the bottom where it’s around 0 degrees Celsius or 32 Fahrenheit.
MORE GUIDES:
Kenmore Refrigerator Freezer Not Working/Cooling (SOLUTIONS)
GE Refrigerator Not Cooling After Power Outage (FIXED)
How To Fix GE Refrigerator Compressor Not Working/Starts Then Stops/Noisy
How To Fix Kenmore Washer Won’t Drain/Keeps Draining/Drain Cycle Problems
Video Guide
Conclusion
In this guide, we have covered the most common causes of refrigerator-freezers not working and cooling. We have also discussed the different solutions to fix these problems.
The most common causes of refrigerator freezers stopping working and cooling are the power cord being loose or damaged, the thermostat switch being burned out, and the fuse in the circuit board that needs to be replaced.
