How To Fix JBL Speaker Won’t Connect or Keeps Disconnecting


Pretty much everyone likes music and currently, the best way to enjoy music is through JBL. JBL speakers are common in the market but they have a few common problems that can be fixed easily.

This guide is meant to help you troubleshoot your JBL Speaker Won’t Connect issue. There are two ways to fix this issue and we will discuss them in this article.


Why Is JBL Speaker Won’t Connect or Keeps Disconnecting


  1. There is a possibility that the speaker is not getting enough power supply.
  2. The headphone jack may not be properly plugged in.
  3. The speaker may have been damaged during transport or storage and needs to be replaced.
  4. There could be a problem with the Bluetooth connection between the speaker and the smartphone/laptop/tablet device you are using to connect it with the speaker system.
  5. The Bluetooth connection between your phone and the speaker might be faulty (or too old).


How to Fix JBL Speaker Won’t Connect/Keeps Disconnecting


JBL speakers are great for playing music in the background, but they sometimes disconnect when you’re not using them. If your speakers keep disconnecting, there are a few things you can try.

First, make sure that the speaker is plugged into a power outlet. If it’s not plugged in, the battery will drain and cause the speaker to disconnect. Secondly, make sure that you have all the necessary cables connected to the speaker.

Lastly, if none of these methods work and your JBL speaker keeps disconnecting, check out our troubleshooting guide to find out what might be causing it.




If you want to fix this issue and reconnect your speaker, follow these steps:

  1. Download and install the latest version of the JBL Connect app from Google Play.
  2. Ensure that Bluetooth is enabled on your phone or tablet.
  3. Open up the app and tap on “Connect” in order to connect your speaker to your device.


Why is the JBL Speaker Not Connecting to iPhone?


This is one of the most common problems that people face with their Bluetooth speakers. They usually connect to their phone and then it suddenly stops working.

The problem might be that your iPhone doesn’t support Bluetooth 4.0 or your device is not paired with the JBL speaker properly. There are also other reasons why this might happen, like if you have a poor connection or if the battery on your speaker is low.

There are many ways to fix this issue, but some of them can be difficult to do on your own. So, you should contact JBL support for help in fixing this issue.


How Do I Reset My AWEI Bluetooth Speaker?


If you’re having trouble with your AWEI Bluetooth speaker, you may need to reset it. Here’s how:

  1. Press and hold the power button for 10 seconds.
  2. Release the power button and wait for the device to turn off completely before pressing it again.
  3. Press and release the power button three times in a row, then press it once more to restart your speaker.


How Do I Reset My Heyday Speaker?


The Heyday speaker is the most popular speaker in the Heyday line.

If you’re experiencing a problem with your speaker, here are some steps you can try to fix it.

  • Unplug the power cord from the back of your speaker and plug it into an outlet that’s not near any other electronics.
  • – Press and hold the power button for 10 seconds until the LED turns off. – Wait five minutes before plugging it back in.
  • – If none of these steps work, contact customer service for help (


How to Force My JBL Speaker To turn Off?


There are many reasons why you might want to force your JBL speaker off. Maybe you want to conserve battery life, or you want to save some space on your desk.

Regardless of the reason, this article will teach you how to force your JBL speaker off.

  • Turn the power switch on the back of the speaker.
  • Press and hold down the power button.
  • Hold down for 10 seconds.
  • Release and wait for two beeps.
  • Your speaker should now be turned off.


How Do I Reset my F&D Bluetooth Speaker?


This article will teach you how to reset the Bluetooth speaker in your F&D headphones.

The following are the steps that you need to do:

  1. Turn off your F&D headphones and remove them from your head.
  2. Press and hold the power button for about 10 seconds until the LED flashes red.
  3. Release the power button, wait for about 2 seconds, then press and hold it again for about 10 seconds until it turns blue.
  4. Put on your F&D headphones and turn them on.


How Do I Put my Heyday Speaker Into Pairing Mode?


Heyday speakers are available for the most part in two modes: pairing mode and solo mode. In order to put your speaker into pairing mode, you need to press and hold the power button on the back of your speaker.

Pairing mode is a feature that lets you pair two Heyday speakers together so that they can play music in sync. The speakers will automatically adjust their volume levels as well as their bass and treble levels so that they’re playing at the same time.

Put your speaker into pairing mode by pressing and holding down the power button on the back of your speaker for about eight seconds until you hear a beep sound to confirm it has been successfully paired with another Heyday speaker.



How To Fix JBL Speaker Keeps or Not Turning Off/On

How To Fix Your Phone Speaker Not Working During A Call

How To Fix Sony TV Sound Skips/Cuts Out/Not Sync/Unclear/Goes Up and Down

How To Fix My iPhone Won’t End Call (Repair Guide)

Hulu Subtitles Not Working (How To Fix It)


Video Guide





JBL speakers are no doubt very very good with good sound, a good battery, and overall durability. However, sometimes it can start misbehaving for reasons unknown.

The guide to fixing JBL Speaker Won’t Connect/Keeps Disconnecting is a useful resource for those who are experiencing the same problem. If you have an older JBL speaker, it is likely that it is not compatible with the latest version of the JBL Connect app.

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

Leave a Comment