How To Fix Insignia TV Remote Not Working (Repair Guide)

Insignia TV remote not working? Here are the steps to troubleshoot your problem. If you are one of the many people who have a problem with their Insignia TV remote, then you will find this guide very helpful.

This guide will show you how to fix your Insignia TV remote by yourself and save some money in the process. Continue reading to find out more on how to go about it.

Contents show

Why is Insignia TV Remote Not Working

Some of the most common reasons for Insignia TV Remote Not Working are:

The batteries are dead.
The IR receiver is not responding.
There is a problem with the remote itself.
The remote needs to be updated with new software.

How to Fix Insignia TV Remote Not Working

The most common issue with the TV remote is that it stops working. This can be caused by several factors, but the most common reason is that the batteries are dead.

The first step in fixing your TV remote is to check if it’s still powered on and if the batteries are still good enough to power it up. If it’s not working, then you should replace them with new ones immediately.

If they are good enough, then you need to reset the device by holding down on any button for 10 seconds or more until you see a red light flashing on and off or hear a beep sound.

METHOD TWO

This is the second method to fix your Insignia TV remote. You’ll need a screwdriver, a Phillips-head screwdriver, and a small flathead screwdriver.

If you don’t have these tools, then you can use the one that came with your TV set.

Step 1: Remove the screws on the back of the remote control by turning them counterclockwise until they are loose and then remove them from the back of the remote control.
Step 2: Grasp both sides of the remote control and gently pull them apart from each other. It should come apart easily without any force required.
Step 3: Remove all of the screws from around your Insignia TV remote control and place them in a safe place so that you can put them back in later.
Step 4: With your Phillips-head screwdriver, take notice of the diagram that is on the lower part of the remote control. This is where you should place your flathead screwdriver and start to pry up on the back of it so you can detach it from its base.
Step 5: Repeat this process until you have detached the remote from its base. It should come away easily with no effort on your part.
Step 6: Remove the two screws in the back of the remote control that is holding the battery cover in place with your small flathead screwdriver.
Step 7: Gently remove the battery cover by pulling it up and off of the body of your remote control.
Step 8: Remove the old batteries from the battery compartment of your remote control by pulling them out with your fingers, a magnet, or nose tweezers.
Step 9: Now is a great time to clean the inside of your remote control. Gently scrape any debris away with a small piece of plastic cut off from an old credit card or something similar and use an adhesive wipe to clean off the inside of your remote control.
Step 9: Replace the old batteries with new ones then assemble the back remotely.

How To Reset Insignia Fire TV Without Remote

The following are the steps to reset Insignia Fire TV:

Power off the device by pressing the power button on the remote control.
Unplug the power cord from the back of your TV and wait for a few seconds before plugging it back in.
Press and hold both volume buttons on your remote control at once for about 10 seconds or until you hear a beep sound.
Release both volume buttons at once and then press one of them again to turn your TV on with sound only, or press both volume buttons simultaneously to turn it on with audio and video.
Wait for the TV to turn on with audio, or with both audio and video, depending on which option you chose in step 4 before continuing.
Power off your TV by pressing the power button on the remote control again.
Plug in your device and power it back up again by pressing the power button on the remote control again once.

Can I Use My Phone As A Remote For My Insignia TV?

The answer is yes. But, there are some factors to consider before you do so.

Can I use my phone as a remote for my Insignia TV?

The answer is yes. But, there are some factors to consider before you do so.

Insignia TVs can be controlled by your mobile device through the TV app and remote control apps like Amazon FireTV Stick Remote App and Google Home Remote App.

How To Connect My Iphone To My Insignia TV?

Connecting your iPhone to your TV is not as complicated as it sounds. It’s a process that can be done in just a few minutes.

You’ll need to connect your iPhone to the TV using an HDMI cable, and then plug the other end into the back of your TV. Once you’re done, you’ll need to go through some more steps so that you can use Siri on your TV.

Insignia TVs have a feature called “Siri Remote” which allows users to use their voice commands instead of using the remote control. To set up this feature, go through these steps: