HP Printer Won’t Turn On / Off/ Boot Up (Troubleshooting Guide)

HP printer is a popular choice for many people. However, it is not uncommon for HP printers to stop working and refuse to boot up.

However, it can get some technical problems that might make it difficult to use. In this article, we will try to provide you with some solutions to fix HP Printer that won’t boot up or turn on or off the problem.

 

HP Printer Won’t Turn On / Off/ Boot Up

 

Why is HP Printer Won’t Turn On

 

The following are five of the most common reasons why one’s HP printer won’t turn on.

  1. The printer is not plugged in.
  2. The printer is out of paper.
  3. The printer is not turned on.
  4. Low ink levels or out-of-ink cartridges.
  5. Power outage or low power supply.

 

How to Fix HP Printer Won’t Boot Up / Turn On / Off.

 

There are many reasons why your HP printer might not turn on. Here is a list of some of the most common issues and solutions that you can try to fix the problem.

  • Check if the power cord is plugged in properly and ensure that it is not loose or damaged.
  • Check if there is any physical obstruction in the way of your printers, such as a pile of papers, clothes, or anything else.
  • Ensure that you are using the right power cord for your printer model.

 

If you have recently unplugged your printer or moved it to an area with a different voltage, this might also be causing the issue. Change the voltage setting accordingly by following these steps:

  1. Turn off the PC and unplug all cables from the printer.
  2. Hold the power button for at least 30 seconds to release power from the printer’s circuit board.
  3. Remove any packing materials from the power cord and plug them into a wall outlet.
  4. If you see an LED display on your printer with a number, that is probably your voltage setting.

 

METHOD TWO

 

HP Printer Won’t Turn On / Off/ Boot Up

 

The guide is about fixing HP Printer that won’t boot up. It includes the following steps:

  1. Unplug the power cord from the back of the printer and the wall outlet.
  2. Disconnect all cables from your printer, including USB, Ethernet, and power cords.
  3. Wait five minutes before plugging in any cables or turning on your printer again.
  4. Plug in all cables to your printer and turn it on again.
  5. If you still cannot turn on your printer or receive a message that says “Printer Error”, try turning it off and unplugging it for 10 seconds before plugging it back in and turning it on again. If the issue persists, try to reset the device with a paper clip.
  6. Check your printer settings if you turn on wireless capabilities without turning on standard printing capabilities.

 

How to Troubleshoot Power Cord.

 

The guide below will help you troubleshoot and fix the HP printer that won’t boot up or turn on.

  • Step 1: Check the power cord. Ensure that the printer is connected to a power outlet and that the power cord is plugged in securely on both ends. If you are using a surge protector, make sure it is not turned off and properly connected to the wall outlet.
  • Step 2: Check if there are any loose cables or broken wires in the back of your printer. If there are any, try repairing them with a soldering iron or replacing them with new ones. You should also check if any cables or wires near your printer were causing interference with its connection to the power supply.
  • Step 3: Check if the power cord is faulty. If it is, try replacing it with a new one or getting a replacement from your HP retailer.

 

How Do You Manually Reset a Printer?

 

Resetting a printer is an important task that should be done periodically. There are many reasons why one should reset their printer.

For example, it can help solve print quality issues or fix a paper jam.

  1. The steps below will show you how to reset your printer manually. Turn off the printer by pressing the power button on the front of the device and unplugging it from its power source. Wait for at least 30 seconds before turning it back on again.
  2. Press and hold down the “Reset” button for at least 10 seconds until you see all of the lights on your machine turn off (the lights will turn back on when you release this button).
  3. Now press and hold down “Reset” for another 10 seconds until the printer’s self-test, the first light in the upper left corner of your machine, turns on.
  4. Wait for the printer to finish its self-test by all lights in the upper left corner turning off (again, it will turn back on when you release “Reset”).
  5. Now press and hold down “Reset” for another 10 seconds until all the other lights in the upper left corner of your machine start to blink.
  6. Now press and hold down “Reset” for another 10 seconds until all the other lights on your printer turn off (all of these will turn back on when you release “Reset”).

 

What is a Cold Reset for an HP Printer?

 

What is a Cold Reset for an HP Printer?

 

A cold reset is a printer reset that is done when the printer is not responding to any other troubleshooting steps. This should be done when the printer has been powered on for an extended period, and you have tried all other methods to fix it.

Unplug the power cord from the outlet for at least 30 seconds, and then plug it back in to do a cold reset.

 

How Do I Get My Printer to Connect Wirelessly?

 

Wireless printers are compatible with most operating systems and mobile devices. They can connect to your device via Wi-Fi, Bluetooth, or even NFC (Near Field Communication).

So what steps do you need to take to set up your printer for wireless printing? First, you will need to determine if your printer is compatible with the type of connection you want.

Next, you will need to install drivers for the connection chosen on your computer or mobile device. You will then have to enter the password that has been assigned by the printer manufacturer and connect your printer to your wireless router.

 

MORE GUIDES ON HP:

How To Fix Dell Monitor Not Connecting to Laptop (Repair Guide)

How To Fix Dell Laptop Keeps Restarting (Repair Guide)

How To Fix Dell Laptop Keeps Freezing

 

Video Guide

 

 

 

 

Conclusion

 

HP printer is a popular choice for many people because it is highly affordable and has several attractive features for the modern consumer. It is not uncommon for HP printers to fail and refuse to boot up, mainly due to the age of the device.

However, it can get some technical problems that might make it difficult to use. In this article, we will try to provide you with some solutions to fix HP Printer that won’t boot up or turn on or off the problem.

Leave a Comment