How To Fix Hisense Remote Not Working (Easy Guide)


If you are looking for a way to fix Hisense remote not working, then this guide is for you. This guide is designed to help you fix your Hisense remote, but it won’t be able to do everything for you.

If you are having trouble with your Hisense remote, other ways might work better for you than this guide. Continue reading to find out how to get started.

How To Fix Hisense Remote Not Working


Why is Hisense Remote Not Working


Hisense remote not working is a common problem with many consumers. It is difficult to find a solution for this issue on the internet.

This article provides 5 reasons why Hisense has remote issues.

  1. Hisense remote battery is dead.
  2. The infrared receiver on Hisense remote is broken or damaged.
  3. The IR receiver on the TV has been removed or blocked.
  4. The remote control has been lost and cannot be found.
  5. The TV is not connected to power.


How to Fix Hisense Remote Not Working


How To Fix Hisense Remote Not Working


This is a short tutorial on how to fix Hisense remote problems.

First, you need to make sure that the remote is not broken by testing it out. If the remote still does not work, then try unplugging it and plugging it back in. If this doesn’t work, then you will need to replace the battery in the remote.

If none of these solutions have worked for you, then you should contact Hisense customer service for assistance with your issue.



Please note that this guide is for Hisense TV models only, and it is not applicable to other brands of TVs.

  1. Power off your TV and unplug it
  2. Remove the batteries from the remote control and leave it out for at least 30 minutes
  3. Put back the batteries into the remote control and power on your TV again.



Try the steps below to fix it.

  1. Check your battery power level.
  2. Recharge the battery.
  3. Check if there is a problem with the TV or cable box.
  4. Check if there is a problem with your wireless network or router.
  5. Reset your remote by pressing and holding the power button for 10 seconds.
  6. Try to remove and replace batteries.



The steps to fix Hisense remote not functioning are as follows:

  1. Check the batteries in your remote.
  2. Check the batteries in your TV.
  3. Try another TV or a different cable provider.
  4. Remove and replace the batteries in your remote and TV again.
  5. Reset your remote by holding down the power button for 10 seconds.
  6. Connect your TV to a different outlet and try again.


How to Control Hisense TV Without Remote


How to Control Hisense TV Without Remote


Some of the major benefits of a universal remote are that it can be programmed to work with multiple devices and it can be used to change the channels on your TV. It also has several different features that make controlling your TV easier.

Universal remotes are designed in such a way that they can be programmed to work with multiple devices and they are easy to use. They also have features like channel changers which make it easier for you to change the channels on your TV without using your hand or looking for an actual remote.


What is The Magic Button on the One For All Remote?

The magic button on One For All remotes is the “Discovery” button. It allows you to explore your remote and discover all of its features.

The Discovery button can be found in the top left corner of your remote. Simply press this button to see what features your remote has and how they work.


How do I Get My Universal Remote to Work Again?

If you have a universal remote, it can be difficult to get it to work again. You may have lost the instructions for your remote or the remote might have been broken and you need help getting it back up and running.

If your universal remote is not working, keep in mind that many of these remotes are wireless. If you know where the remote is located, try resetting the device by unplugging it from its power source and plugging it into a different outlet. If resetting doesn’t work, then you may need to replace the batteries or try replacing them with new ones.

If all else fails, contact customer service for your specific brand of universal remote.


How Do I Program My Hisense Universal Remote?

Programming your Hisense universal remote is easy. You just need to follow the steps below:

  1. Press and hold the “TV” button
  2. Press “On/Off” on the remote
  3. Select “Setup” from the on-screen menu
  4. Select “TV Setup
  5. Use the up and down arrows to select your TV brand, model number, and country of origin.
  6. Press “Next“. You will be taken to a screen that displays your TV model’s codes for inputs and outputs, as well as other information about your TV.
  7. Input these numbers into your remote by pressing buttons 1 through 8 on each side of the directional pad in numerical order (1 is usually at the top left of the directional pad, and 8 is usually at the bottom right of the directional pad).
  8. Enter your TV manufacturer’s codes for each input and output (A/V1 has the number 1, DVI has a 2, HDMI has a 3)- For example: if you input “2” on the remote as A/V1 then press “Next“. You will be taken to the next input, which is A/V2. Input “3” on the remote as DVI and press “Next“. You will now be put into A/V3. Input “1” as HDMI and press “Next“. You will now be in A/V1 again.


How to Program a Magic Remote?

I want to make a remote that can control any device in my house. It must work with my TV, stereo, and air conditioner.

The first step is to establish how the remote should work. I need it to be able to turn on or off all of the devices in my house and change their volume.

After deciding how the remote should work, I need to decide what type of input it will take for each device. For example, for my TV I would use a universal remote or an infrared blaster. For my stereo, I would use a Bluetooth receiver and for my air conditioner, I would use an RF transmitter.

Next, I need to figure out which type of programming language will allow me to create this function on the remote.


MORE ON Hisense:

How To Fix Hisense TV Not Working (Repair Guide)

How To Fix Hisense TV Netflix Not Working (Repair Guide)

Hisense TV YouTube Not Working (How To Fix It)

How To Fix Chromecast Netflix Not Working (Repair Guide)










In this guide, we have tried to offer a few solutions to fix Hisense remote not working. These solutions are based on the assumption that the user is facing issues with their remote control not working.

This could be due to a faulty remote or some other issue. If you find this article useful please ahar3 and don’t forget to leave your questions in the comments section.

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

Leave a Comment