How To Fix DIRECTV Remote Not Working (Repair Guide)


If you have a DIRECTV remote and it’s not working, you can fix it by following the steps mentioned in this guide. This guide is a comprehensive step-by-step walkthrough of how to fix your remote.

It includes troubleshooting tips for different problems with your remote, like batteries not working or the remote being stuck. Continue reading to find out how to get started.


How To Fix DIRECTV Remote Not Working


Why is DIRECTV Remote Not Working


Some people have had this issue with the DIRECTV remote. They may also be experiencing other problems like no audio, intermittent audio, or no display.

Here are five reasons why the remote is not working.

  1. Remote batteries need to be replaced: If the battery in your remote is dead, you will not be able to use it to control your TV or DVR.
  2. Remote is damaged: If the remote has been broken or misplaced, it will not work properly and can’t be used.
  3. Remote needs a firmware update: If your remote’s operating system needs an update, you will have to wait for a technician to come out and update the system for you before it can work again.
  4. The receiver is on mute: If your TV or receiver is muted, the remote won’t work.
  5. The receiver is in power saving mode: To save energy and prevent overheating, some receivers will enter a power-saving mode which will disable some features on their remotes like Bluetooth and IR, meaning the remote will not be able to control those features at all.


How to fix DIRECTV Remote Not Working


Direct TV Remote Not Working is a common problem that many of us have encountered at one point or another. It can be frustrating because you cannot watch your favorite shows and movies with your friends and family. The solution to this problem is pretty straightforward:

  1. Make sure the batteries are fresh in the remote.
  2. Make sure you are using the remote near the Direct TV box.
  3. Try using a different remote control device such as a keyboard or mouse.


The remote control also might need to be reset. This can be done by holding down the power button and pressing the red button on the back of the remote control for 10 seconds. If this doesn’t work, you should contact DIRECTV customer service to help you out.


How to Program Directv Remote to Box


DIRECTV Remote Not Working


There are a lot of remotes that come with your Directv box. However, programming them can be a hassle if you don’t know the codes.

There are many ways to program your Directv remote. You can use a computer or smartphone to do it. The steps below will help you program your Directv remote to Box.

  1. Download the Directv remote app on your smartphone.
  2. Open the app and select “Program Remote“.
  3. Select “Box” from the list of devices.
  4. Connect your Box to your TV or receiver with an HDMI cable.
  5. Press the “Program Remote” button on the remote to start programming it.
  6. Press the “Device” button on the remote to select your Box.
  7. Press “Program” to start programming your Box.


However, there is an easier way that doesn’t require any extra devices – using your voice! The voice command feature on the remote will let you control the TV and set up the TV settings just by speaking into it.


How to Program Directv Remote To Samsung Tv


If you have a Samsung TV and want to program your Directv remote to it, here is how you can go about doing so.

  • Step 1: Press the “Menu” button on the remote. This will bring up a list of options.
  • Step 2: Choose “System Setup.”
  • Step 3: Choose “TV Settings.” This will bring up a list of options and one that says “Program Remote to TV.”
  • Step 4: Press the green button on your remote and hold it down for three seconds until the light starts flashing. You should then see some numbers on your screen.
  • Step 5: Enter those numbers into your Directv remote by pressing the corresponding buttons on your TV’s remote.


Directv Remote Replacement Cost


Remote replacement cost is replacing your existing remote with a new one. It includes the price of the remote, shipping, and installation.

The remote replacement cost for Directv customers is $30. That is because Directv offers a one-time-only discount on all remotes replaced during the first 30 days after purchase.


How Do I Fix My Tv Remote Sensor?


If you’re experiencing problems with your TV remote sensor, it may be due to dirt or debris inside the sensor. The best way to fix this is by using a toothpick and some alcohol.

The first step is to remove all the debris from the sensor. You can use your toothpick and dab some alcohol on it. This will allow you to see if any wires are broken or any other issues causing the problem.

If you’re not sure what’s causing the problem, try cleaning out the sensor again and see if it fixes your issue. If not, you may need to replace your remote sensor with a new one.


What Does the Red Light on a Directv Remote Mean?


The red light on the Directv remote means that the receiver is receiving signals from the satellite. It will turn green when it has been turned off.

When you see a red light on your Directv remote, you are getting a signal from the satellite and can watch TV. When you see a green light, you have lost signal and can’t watch TV anymore.


How Do You Sync a Remote to a Tv?


The remote is the most basic and important device in the living room. It controls all the TVs, cable boxes, DVD players, and video game consoles.

However, many people have not used a remote in a long time. They might have replaced their TV with Smart TVs, or they might have never had one.

To sync a remote to a tv, you need to identify which remote is compatible with your tv. Then you need to find out which button on that remote corresponds to which function on your TV/cable box/DVD player etc. That’s where you’ll find the codes for your specific device listed in the manual for that device itself.


How Do You Test if a Remote is Working?


When a remote is working, you will see the green light on the top of the remote.

The best way to test if a remote is working is by pressing its buttons. If they are not responding, you might need to replace your remote.



How To Fix TCL TV Remote Not Working (Repair Guide)

How To Fix Vizio TV Remote Not Working (Repair Guide)

How To Fix Google Tv Remote Not Connecting (Repair Guide)

How To Fix LG TV Remote Won’t Control Volume (Repair Guide)

How To Fix Fire TV Remote Volume Not Working (Repair Guide)

How To Fix Cox Remote Not Working (Repair Guide)


Video Guide








This guide has discussed how to program your Directv remote to work with your Samsung TV. We have also shown you how to use the Samsung TV remote to control the Directv remotes.

It is a common problem that many people experience when they have multiple devices in their home that they want to control with one remote. If you have questions, please ask using the comments section.

How useful was this post?

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

Leave a Comment